The Glas-Craft Guardian A5-3000IP (in-plant) proportioners is a high performance dispensing system for foam packaging & foam-in-place applications.  Specifically designed for in-plant applications. Its compact, portable design fits through standard doorways and is easy to maneuver within the plant. Options available for the Guardian IP systems include the delayed air purge and dispense cycle counter.

Specifications:
• Max Output: 22 lb per min / 10 kg per min
• Max Temp: 190º F / 88º C
• Primary Heaters: 3000 Watts
• Max Pressure: 1600 PSI, 100 Bar
• Hose Size: 1/4” i.d.
• Length: 48 ft. Std / 100 Ft Max
• Hose Heat: Heater Cable
• Heat Control: Solid-state LED Control
• Material Feed: Gravity Feed
• P² Probler Gun: Round Spray 23950-02

Electric Requirements:
Single Phase 220 VAC 25 amp 50 / 60 Hz

Air requirements:
1 gpm/3.8 lpm output
10 cfm @ 100 psi 680 l / min @ 6.8 bar
33 cfm @ 100 psi 935 l/ min @ 6.8 bar

The Glas-Craft Guardian A5-6000IP (in-plant) proportioners is a high performance dispensing system for spray foam insulation, foam injection/ pour, and applying adhesives. Its compact, portable design fits through standard doorways and is easy to maneuver within the plant. Options available for the Guardian IP systems include the delayed air purge and dispense cycle counter.

Specifications:
• Max Output: 22 lb per min / 10 kg per min
• Max Temp: 190º F / 88º C
• Primary Heaters: 3000 Watts
• Max Pressure: 3000 PSI, 100 Bar
• Hose Size: 1/4” i.d.
• Length: 48 ft. Std / 200 Ft Max
• Hose Heat: Heater Cable
• Heat Control: Solid-state LED Control
• Material Feed: Transfer Pumps
• P² Probler Gun: Round Spray 23950-02

Electric Requirements:
Single Phase 220 VAC 50 amp 50 / 60 Hz

Air requirements:
1 gpm/3.8 lpm output
10 cfm @ 100 psi 680 l / min @ 6.8 bar
33 cfm @ 100 psi 935 l/ min @ 6.8 bar
Add 15 cfm for transfer pumps

The Glas-Craft Guardian A6-6000IP (in-plant) proportioners is a high performance dispensing system for high pressure spray-on bed liners, spraying over foam or eps, and architectural coatings.  Specifically designed for in-plant applications. Its compact, portable design fits through standard doorways and is easy to maneuver within the plant. Options available for the Guardian IP systems include the delayed air purge and dispense cycle counter.

Specifications:
• Max Output: 22 lb per min / 10 kg per min
• Max Temp: 190º F / 88º C
• Primary Heaters: 6000 Watts
• Max Pressure: 1600 PSI, 100 Bar
• Hose Size: 3/8” i.d. / 95 mm
• Length: 48 ft. Std / 100 Ft Max
• Hose Heat: Heater Cable
• Heat Control: Solid-state LED Control
• Material Feed: Gravity Feed
• P² Probler Gun: Round Spray 23950-01

Electric Requirements:
Single Phase 220 VAC 25 amp 50 / 60 Hz

Air requirements:
1 gpm/3.8 lpm output
18 cfm @ 100 psi 906 l / min @ 6.8 bar
Does not Includes air transfer pumps
47 cfm @ 100 psi 1330 l / min @ 6.8 bar
Add 15 cfm for transfer pumps

The Glas-Craft Guardian A6-12000IP (in-plant) proportioners is a high performance dispensing system for high pressure spray-on bed liners, spraying over foam or eps, and architectural coatings, protective coatings for railcars, heavy equipment, and industrial equipment. Its compact, portable design fits through standard doorways and is easy to maneuver within the plant. Options available for the Guardian IP systems include the delayed air purge and dispense cycle counter.

Specifications:
• Max Output: 22 lb per min / 10 kg per min
• Max Temp: 190º F / 88º C
• Primary Heaters: 12000 Watts
• Max Pressure: 3000 PSI, 100 Bar
• Hose Size: 3/8” i.d. / 95 mm
• Length: 48 ft. Std / 200 Ft Max
• Hose Heat: Heater Cable
• Heat Control: Solid-state LED Control
• Material Feed: Transfer Pumps
• P² Probler Gun: Round Spray 23950-02

Electric Requirements:
Single Phase 220 VAC 75 amp 50 / 60 Hz
Three Phase 220 VAC 40 amp 50 / 60 Hz

Air Requirements:
1 gpm/3.8 lpm output
18 cfm @ 100 psi 906 l / min @ 6.8 bar
Does not Includes air transfer pumps
47 cfm @ 100 psi 1330 l / min @ 6.8 bar
Add 15 cfm for transfer pumps

The Glas-Craft Guardian A5-6000 Dispensing System is designed for economical use in small to medium foam output applications. The Guardian A5-6000 may also be used for in wall foam insulation, as well as pour foams and in plant operations such as Spa insulation. A 50-foot heated hose assembly is standard on the Guardian A5-6000 unit.

Specifications:
• Max Output: 20 lb per min / 9 kg per min
• Max Temp: 190º F / 88º C
• Primary Heaters: 6000 Watts
• Max Pressure: 1600 PSI, 100 Bar
• Hose Size: 3/8” i.d. / 95 mm
• Length: 50 ft. Std / 310 Ft Max
• Heat: Copper-wound Hoses
• Heat Control: Solid-state LED Control
• Material Feed: Transfer Pumps
• P² Probler Gun: Round Spray 23950-01

Electric Requirements:
Single Phase 220 VAC 50 amp 50 / 60 Hz
Three Phase 220 VAC 25 amp 50 / 60 Hz
Three Phase 380 VAC 25 amp 50 / 60 Hz

Air requirements:
1 gpm/3.8 lpm output
24 cfm @ 100 psi 680 l / min @ 6.8 bar
Includes air transfer pumps

The Glas-Craft Guardian A5-12000 Dispensing System is designed for economical use in medium to larger foam output applications. The Guardian A5-12000 may be used for roofing foam, in wall foam insulation, as well as pour foams as well as in plant operations such as Spa insulation & refrigerated insulation panels. A 50-foot heated hose assembly is standard on the Guardian A5-12000 unit.

Specifications:
• Max Output: 20 lb per min / 9 kg per min
• Max Temp: 190º F / 88º C
• Primary Heaters: 6000 Watts
• Max Pressure: 1600 PSI, 100 Bar
• Hose Size: 3/8” i.d. / 95 mm
• Length: 50 ft. Std / 310 Ft Max
• Heat: Copper-wound Hoses
• Heat Control: Solid-state LED Control
• Material Feed: Transfer Pumps
• P² Probler Gun: Round Spray 23950-01

Electric Requirements:
Single Phase 220 VAC 50 amp 50 / 60 Hz
Three Phase 220 VAC 25 amp 50 / 60 Hz
Three Phase 380 VAC 25 amp 50 / 60 Hz

Air requirements:
1 gpm/3.8 lpm output
24 cfm @ 100 psi 680 l / min @ 6.8 bar
Includes air transfer pumps

The Glas-Craft Guardian A6-6000 Dispensing System is designed for economical use in small to medium polyurethane / polyurea output applications. The Guardian A6-6000 may also be used for higher output foam insulation, as well as pour foams. A 50-foot heated hose assembly is standard on the Guardian A6-6000 unit.

Specifications:
• Max Output: 20 lb per min / 9 kg per min
• Max Temp: 190° F / 88° C
• Primary Heaters: 6000 Watts
• Max Pressure: 2200/3000 PSI, 150/204 Bar
• Hose Size: 3/8” i.d. / 95 mm
• Length: 50 ft. Std / 310 Ft Max
• Heat: Copper-wound Hoses
• Heat Control: Solid-state LED Control
• Material Feed: Transfer Pumps
• P² Probler Gun: Round Spray 23950-01

Electric Requirements:
Single Phase 220 VAC 50 amp 50 / 60 Hz
Three Phase 220 VAC 25 amp 50 / 60 Hz
Three Phase 380 VAC 25 amp 50 / 60 Hz

Air requirements:
1 gpm/3.8 lpm output
33 cfm @ 100 psi 834 l / min @ 6.8 bar
Includes air transfer pumps

The Glas-Craft Guardian A6-12000 Dispensing System is designed for use in house or in a field location. The Guardian A6-12000 is the most versatile unit for the money. It can be used for bedliners, industrial flooring, or various foam applications. A 50-foot heated hose assembly is standard on the Guardian A6-12000 unit.

Specifications:
• Max Output: 22 lb per min / 10 kg per min
• Max Temp: 190° F / 88° C
• Primary Heaters: 12000 Watts
• Max Pressure: 2200/3000 PSI, 150/204 Bar
• Hose Size: 3/8” i.d. / 95 mm
• Length: 50 ft. Std / 310 Ft Max
• Heat: Copper-wound Hoses
• Heat Control: Solid-state LED Control
• Material Feed: Transfer Pumps
• P² Probler Gun: Round Spray 23950-01

Electric Requirements:
Single Phase 220 VAC 75 amp 50 / 60 Hz
Three Phase 220 VAC 35 amp 50 / 60 Hz
Three Phase 380 VAC 35 amp 50 / 60 Hz

Air Requirements:
1 gpm/3.8 lpm output
33 cfm @ 100 psi 834 l / min @ 6.8 bar
Includes air transfer pumps

The Glas-Craft MH III Dispensing System is a hydraulically driven system, designed for use in house or in a field location. The MH III is the top of the line polyurethane/polyurea machine for the bedliner and is a lower air consumption unit. It relies on a hydraulic motor instead of a pneumatic motor. A 50-foot heated hose assembly is standard on the MH III unit.

Specifications:
• Max Output: 22 lb per min / 10 kg per min
• Max Temp: 190° F / 88° C
• Primary Heaters: 10000 Watts
• Max Pressure: 3000 PSI / 204 Bar
• Hose Size: 3/8” i.d. / 95 mm
• Length: 50 ft. Std / 310 Ft Max
• Length: 10 ft. Heated Whip
• Heat: Copper-wound Hoses
• Heat Control: Solid-state LED Control
• Material Feed: Transfer Pumps
• Probler Gun: Round Spray 17254-02

Electrical Requirements:
74 amp, 208-240 VAC, single phase, 60Hz.
50 amp, 208-240 VAC, three phase, 60Hz.
40 amp, 380 VAC, three phase 50/60 Hz.

Air Requirements:
15 cfm @100 psi / 425 l/min @ 6.8 bar

The Glas-Craft MH II Dispensing System is a hydraulically driven system, designed for use in house or in a field location. The MH II is a lower air consumption unit. It relies on a hydraulic motor instead of a pneumatic motor. The MH II provides slightly less pressure than the MX II dispensing unit . A 50-foot heated hose assembly is standard on the MH II unit.

Specifications:
• Max Output: 25 lb per min / 11.4 kg per min
• Max Temp: 190° F / 88° C
• Primary Heaters: 6000 Watts
• Max Pressure: 2500 PSI / 170.5 Bar
• Hose Size: 3/8” i.d. / 95 mm
• Length: 50 ft. Std / 300 Ft Max
• Heat: Copper-wound Hoses
• Heat Control: Solid-state LED Control
• Material Feed: Transfer Pumps
• Probler Gun: Round Spray 17254-02

Electric Requirements:
60 amp, 208-240 VAC, single phase, 50/60 Hz (optional three phase).

Air Requirements:
15 cfm @100 psi / 425 l/min @ 6.8 bar

The Glas-Craft MH Dispensing System is the largest hydraulically driven system in the Glas-Craft Line. Designed for use as a high output system for continues use and large volume spraying or pouring. The MH is the big brother to the MH II, but with double the output and heat. A 50-foot heated hose assembly is standard on the MH unit.

Specifications:
• Max Output: 45 lb per min / 21 kg per min
• Max Temp: 190° F / 88° C
• Primary Heaters: 14000 Watts
• Max Pressure: 3000 PSI / 204 Bar
• Hose Size: 3/8” i.d. / 95 mm
• Length: 50 ft. Std / 300 Ft Max
• Heat: Copper-wound Hoses
• Heat Control: Solid-state LED Control
• Material Feed: Transfer Pumps
• Probler Gun: Round Spray 17254-04

Electric Requirements:
63 amp, 208-240 VAC, single phase, 60 Hz (optional three phase).

Air Requirements:
15 cfm @100 psi / 425 l/min @ 6.8 bar